 The
incredibly powerful, smooth and silent E+ propulsion system
is now available as a kit that makes it easy to convert
most 26" wheel bicycles into customized high speed
electric bikes.
Motors
are available in 750w and 1000w and come with a 7-speed
cassette (13-30) installed, axle, quick release skewer and
torque bar.
Batteries
- 36 Volt, 10 Amp-hour, Nickel-Metal Hydride (NiMH) batteries
are installed with a quick release axle, and cable protection
cover for safe and easy removal of the front wheel.
The
E+ Flex kit also includes a highly advanced display
console, brake levers with integrated cutoff,
automotive grade connectors and cables plus a battery charger.
PLEASE
NOTE:
The E+ 1000 watt needs to be registered in the state of
California as a motorized bicycle using DMV form REG
230. California DMV registration requires a one-time
registration fee and take 4 to 6 weeks to receive mini-plates
that need to be attached to the electric bicycle. A valid
driver's license and DOT helmet are also required.
| Maximum
Speed: |
|
20
mph (750W Version)
30+ mph (1000W Version) |
| Vehicle
Range: |
|
25-28
miles at 15 mph*
18-20 miles at 20 mph*
12-15 miles at 25 mph
* 185 lbs rider on flat pavement with no pedaling |
| Power
Output: |
|
Proprietary
EMS hub mounted brushless permanent magnet electric
motor. All power and control electronics are sealed
inside. 750 watts or 1000 watts. |
|
Torque Output: |
|
Computer
controlled with throttle input, nineteen user selectable
riding modes,
Max: 85 Nm |
| Battery
Pack: |
|
Proprietary
EMS hub mounted 36V 9AH battery pack with Battery Management
System and all electronics sealed inside. Battery life
at 100% output is 500+ charging cycles. |
|
Vehicle Controller and Display: |
|
Detachable
controller display shows speed, distance traveled, battery
capacity, cruise control functions and 19 riding mode
using, advanced software algorithms. |
| Wheels: |
|
Alex
DX-32 36 hole dual wall construction rim - black
Thorn resistant tubes
14AWG spokes |
| Rear
Gears: |
|
7-speed
cassette (13-30) |
| Tires: |
|
Mountain
Bikes: 26 x 1.95" Kenda Khan tires
Street Bikes: 26 x 2.125" Kenda Kraze street
tires |
| Motor
Power and Data Cables: |
|
Cables
extend 8" (200mm) along the rear dropout from the
rear axle |
| Battery
Power and Data Cables: |
|
Battery
cables extend 5" (130 mm) along the front fork
from the front axle |
| Vehicle
Power and Data Cables: |
|
Bike
frame cables are 55" (1400 mm) long |
| Throttle
and Brake Switch Cable: |
|
Throttle
and brake cable for handlebars are 27.5" (700 mm).
Long Cables for handlebars greater than 27.5" (700
mm) and less than 45" (1150 mm) are available. |
| Front
Fork Compatibility: |
|
Front
forks require V-Brake mounts and a fork width of 89
to 100 mm |
| Rear
Dropout Compatibility: |
|
Rear
dropout must be standard 135mm width and be one of the
following types:
Dropout with rear IS type disc caliper mounts and V-brake
mounts
Dropout with rear IS type disc caliper mounts ONLY (With
EMS Disc Brake Kit)
Dropout with V-brake mounts ONLY (With EMS Universal
Torque Bar Adapter) |
The E+ electric motor
The
E+ is powered by a newly designed and proprietary
EMS 1000 watt (750 watt standard) hub-mounted, brushless
permanent magnet motor with a state-of-the-art microprocessor
and field oriented control.
|
Most
electric bikes use off-the-shelf controller units
of poor quality and limited capabilities. E+ uses
a display controller unit with state-of-the-art microprocessor
designed for the E+.
|
The
E+ electric bicycle battery
The
E+ battery pack is also newly designed and proprietary
and available only on E+ bikes. It features a 36
Volt 9 Ah NiMH battery with replaceable sets of
5 cells and electronics sealed inside the front
hub.
|
Order
the E+ 750w Flex Electric Bicycle Kit for $1975
Order
the E+ 1000w Flex Electric Bicycle Kit for $2275
with $65
shipping in the Continental USA.
Test
rides of the current E+ models are available at our Laguna
Beach showroom.
|
