Bionx
250 watt motor with 24 volt Lithium-Ion Battery
The
super-light lithium-ion 24 volt battery pack has a 20% increase
in capacity compared to the NiMH batteries and weighs more
than three pounds less. The 250 watt electric hub
motor is activated by pedaling with four assistance levels.
This allows you to change the amount of help the Bionx motor
gives you and ride efficiently on the hills or the flats.
The
Bionx kit includes, a spoked wheel with motor, console,
battery mount with cables, battery pack and charger.
Wheel
sizes: 700c, 26", 24", 20", 18", all with a standard
135 mm rear drop-out.
Gearing
installation is easy with a threaded free wheel.
The
BionX system can be installed on a tandem, folding
bike or recumbent; any bicycle with a standard shifting
system.
The
Bionx control console includes a programmable anti-theft
alarm and a thumb throttle for instant acceleration.
The
Bionx motor wheel is compatible with disc or rim
brakes.
Variable-speed
thumb throttles are included with all Bionx 350
and 500 wat electric conversion kits.
Control at your fingertips
The Control Console controls four assistance levels.
The analog display indicates power supplied by the
battery.
Re-Generative: The analog display
indicates energy transmitted to the battery. The
console includes a multifunctional odometer that displays
the following information:
current speed
distance traveled
odometer
trip
meter
average speed
The
console includes an alarm system with a 4-digit
PIN (personal identification number). When the alarm
system is activated, two wheel turns are enough to
set it off. From that moment, the motor goes into
generative mode 4 and the alarm sounds.
Easy
Motor Installation
Every kit includes a wheel with the motor spoked in
so the Bionx power system can be installed on most
bicycles simply by replacing the rear wheel of your
bicycle with the BionX wheel and wheel motor.
The
BionX system can be installed on a tandem, folding
bike, recumbent, recumbent trike - basically any bicycle
with an 9-speed rear derailleur or smaller.
Battery type:
24 V, 8 amp Weight:
6.1 lb Range:
Mode 1: 50 miles
Mode 2: 40 miles
Mode 3: 25 miles
Mode 4: 18 miles
The
Bionx Motor is efficient.
The Bionx system is powered by a lightweight, zero
maintenance motor. It is equipped with magnetic field
drive technology and there is no friction inside the
motor, thus no wear.
Type: High performance direct drive
generative hub motor (no gears or brushes).
External
case: Aluminum
Four
multiplying effort levels: The motor can
boost your thrusting power by 25%, 50%, 100%, or
200%,depending on the assistance level selected.
Four
generation levels: The battery can be recharged
when riding, braking or going downhill and of course,
by plugging it in.
Intelligent
system: Using a microprocessor, the motor
calculates your thrust and compensates the weakest
leg to ensure a smooth progression.
All
Weather Safety: The wheel is completely
sealed so you can ride your bicycle in the rain.
A thermal protection prevents any overheating.
250W
Motor Specifications
Power:
250 W nominal and 450 W peak.
Nominal
torque: 7 N.m
Maximum
torque: 25 N.m
Weight:
3.5 kg/7,7 lb
Bionx
Battery - so much power so little weight
The super-light lithium-ion battery pack will take
you up to 62 miles depending on assistance levels
and can be charged in 3 hours.
The
Bionx systems require a thread-on freewheel for rear
wheel gearing. If you are unsure as to what
size freewheel is needed, simply count the number
of sprockets on the rear wheel. Electric Cyclery customers
have the option of ordering a 7, 8, or 9 speed freewheel
with any of the Bionx conversion kits on checkout.
Easy
Motor Installation
